The EA230-K-30/1000 is an electric motorised chain drive for opening and closing windows and flaps for smoke and heat extraction and for controlled natural ventilation. The EA230-K-30/1000 chain drive with its 230 V AC is designed for ventilation applications. The solo drive is characterised by its extremely low power consumption. The EA230-K-30/1000 has a pull and push force of 300 N. The stroke is 1000 mm. The stroke length of the actuator can be shortened by 100 mm or 200 mm using DIP switches. The drive for demanding objects With its extremely smooth running and low noise levels, the EA230-K-30 chain drive opens and closes windows and flaps almost silently. The drive also has a soft start and a soft-close function for seal relief. Visually, the EA230-K-30/1000 chain drive blends seamlessly into its surroundings. The compact, elegant aluminium housing makes the chain drive particularly suitable for sophisticated building designs. The EA230-K-30 at a glance: - Soft start - Extremely smooth running - Low noise - Soft close - Electronic zero-point reset - Stroke reduction via DIP switch Consoles not included

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/1000 chain drive The PA-K-50/1000 chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/1000 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1000 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/1000-DA chain drive The PA-K-50/1000-DA chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/1000-DA chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1000 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/1000-S chain drive The PA-K-50/1000-S chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/1000-S chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1000 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/1200 chain drive The PA-K-50/1200 chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/1200 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1200 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/1200-DA chain drive The PA-K-50/1200-DA chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/1200-DA chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1200 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/1200-S chain drive The PA-K-50/1200-S chain drive is a synchronised drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/1200-S chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1200 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives certified as NSHEVs As part of the SIMON SHEV, the PA-K-50 chain drive with various profile systems has been tested and certified as a NSHEV in accordance with DIN EN 12101-2. The drive unit has a soft start and a soft close as standard. In the CLOSE direction, 75 mm before the end position, the soft close ensures a reduced speed and less force for seal relief. Thanks to the extremely smooth running and the integrated soft-close area, flaps and windows can be opened and closed almost silently. PA-K-50 chain drives can be used with additional locking mechanisms The drive signals a potential-free contact for additional locking devices in the end positions and can therefore be used with locking drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/300 chain drive The PA-K-50/300 chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/300 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 300 mm. If required, the stroke can easily be shortened using the SIMON LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/300 chain drive The PA-K-50/300 chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/300 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 300 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. Parameterisation with software interface SICO LINK The connection is made via the SICO-PLUG connection plug. This contains the SICO BUS programming interface by which parameters such as opening stroke and force can be parameterised and further status messages can be read out. Products of the PA-series are available in different versions as solo and synchro capable actuators. They can be networked with each other in synchronous groups as well as for remote control with SHEV control panels and the building management system. All chain actuators of the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain actuators can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlocking drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/300-S chain drive The PA-K-50/300-S chain drive is a synchronised drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/300 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 300 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/300-S-DA chain drive The PA-K-50/300-S-DA chain drive is a synchronised drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/300 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 300 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/600 chain drive The PA-K-50/600 chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/600 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 600 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/600 chain drive The PA-K-50/600 chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/600 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 600 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/600-S chain drive The PA-K-50/600-S chain drive is a synchronised drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/600 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 600 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/600-S-DA chain drive The PA-K-50/600-S-DA chain drive is a synchronised drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/600 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 600 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/800 chain drive The PA-K-50/800 chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/800 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 800 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/800 chain drive The PA-K-50/800 chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/800 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 800 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/800-S chain drive The PA-K-50/800-S chain drive is a synchronised drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/800 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 800 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain. PA-K-50 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-50 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 500 N - performance features of the PA-K-50/800-S-DA chain drive The PA-K-50/800-S -DA chain drive is a synchronised drive with integrated load cut-off. The chain drive can be used to automate inward and outward opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/800 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 800 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-65 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-65 chain drives are equipped with a rigid chain. PA-K-65 chain drives with SICO LINK software interface The chain drives are controlled using a microcontroller, which can also be parameterised using SIMON PROtec's own software. Parameters such as opening stroke, maximum current and force can be easily changed via the SICO LINK software interface. PA-K-65 chain drives certified as NSHEVs Connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. Powerhouse with 650 N - performance features of the PA-K-65/1000 chain drive The PA-K-65/1000 chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 650 N, the PA-K-65/1000 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1000 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-65 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-65 chain drives are equipped with a rigid chain. PA-K-65 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-65 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlocking drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are very well suited for use in demanding properties in the residential and commercial sectors. Chain drives are available as solo drives and as synchronised drives. Powerhouse with 650 N - performance features of the PA-K-65/1000-DA chain drive The PA-K-65/1000-DA chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 650 N, the PA-K-65/1000-DA chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1000 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-65 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-65 chain drives are equipped with a rigid chain. PA-K-65 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-65 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlocking drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are very well suited for use in demanding properties in the residential and commercial sectors. Chain drives are available as solo drives and as synchronised drives. Powerhouse with 650 N - performance features of the PA-K-65/1000-S chain drive The PA-K-65/1000-S chain drive is a synchronised drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 650 N, the PA-K-65/1000-S chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1000 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-65 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-65 chain drives are equipped with a rigid chain. PA-K-65 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-65 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlocking drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are very well suited for use in demanding properties in the residential and commercial sectors. Chain drives are available as solo drives and as synchronised drives. Powerhouse with 650 N - performance features of the PA-K-65/1200 chain drive The PA-K-65/1200 chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 650 N, the PA-K-65/1200 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1200 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.

Chain drives - powerful window openers The PA-K-65 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-65 chain drives are equipped with a rigid chain. PA-K-65 chain drives with SICO LINK software interface The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides. PA-K-65 chain drives can be used with additional interlocks The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlocking drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties. Powerhouse with 650 N - performance features of the PA-K-65/1200-DA chain drive The PA-K-65/1200-DA chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 650 N, the PA-K-65/1200-DA chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1200 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.