Go to homepage
Shopping cart €0.00*
Filter
K2 1502-0.jpg
Accessories DAS
The upper bracket DAS is an accessory for the linear actuator type EA-L Function: Upper bracket, type DAS, wing bracket for upper motor mounting EA-L, snap-on design Overview of upper bracket DAS: upper bracket for linear actuator type EA-L galvanised with wing bracket incl. stud bolt (d=6 mm) for spindle fastening

€24.68*
M2 1091-0.png
Accessories EA-SZ-M-1000
Accessories Rack and pinion drive EA-SZ-M-1000 Rack and pinion drive EA-SZ-M-1000 at a glance: EA-SZ-M-1000 rack and pinion carrier, type EA-SZ-M with eye bolt (d=6 mm) incl. brackets (upper and lower bracket) Console bearing point not adjustable not suitable for LO drives! Attention! Different brackets for SZ and SZ-M

€168.24*
M2 1083-0.png
Accessories EA-SZ-M-350
EA-SZ-M-350 rack and pinion carrier for rack and pinion drive Rack and pinion drive EA-SZ-M-350 at a glance: Rack and pinion drive, type EA-SZ-M with eyebolt d=6 mm upper and lower bracket included in the scope of delivery non-adjustable bracket bearing point not suitable for LO drives

€130.10*
M2 1084-0.png
Accessories EA-SZ-M-550
Accessories Rack and pinion drive EA-SZ-M-550 Rack and pinion drive EA-SZ-M-550 at a glance: Rack and pinion carrier type EA-SZ-M with eye bolt (d=6 mm) incl. upper and lower bracket Console bearing point not adjustable not suitable for LO drives! Attention! Different brackets for SZ and SZ-M

€136.84*
M2 1089-0.png
Accessories EA-SZ-M-750
Accessories Rack and pinion drive EA-SZ-M-750 Rack and pinion drive EA-SZ-M-750 at a glance: Rack and pinion carrier type EA-SZ-M with eye bolt (d=6 mm) incl. upper and lower bracket Console bearing point not adjustable not suitable for -LO drives! Attention! Different brackets for SZ and SZ-M

€149.17*
M2 1083 A-0.png
Accessories EA-SZ-VERBIND-1
Connecting shaft between EA-SZ and EA-SZ-M, length 1000 mm (aluminium tube length 966 mm) EA-SZ-VERBIND-1 accessories at a glance: Connecting shaft between SZ and SZ-M Aluminium tube length 966 mm Intermediate lengths not possible not suitable for -LO drives

€38.14*
M2 1083 B-0.png
Accessories EA-SZ-VERBIND-2
Connecting shaft between EA-SZ and EA-SZ-M, length 2000 mm (aluminium tube length 1,966 mm) EA-SZ-VERBIND-2 accessories at a glance: Connecting shaft between SZ and SZ-M Aluminium tube length 1,966 mm Intermediate lengths not possible not suitable for -LO drives

€68.41*
K2 1539-0.png
Accessories HK-L
Accessories Rear bracket HK-L for linear actuator EA-L and EA-L/S. Function: Rear bearing bracket for linear and slotted actuators EA-L / EA-L/S HK-L bracket at a glance: lower bracket (type UK) for linear actuator EA-L and EA-L/S can be clamped laterally for rotatable mounting infinitely variable positioning consisting of clamping piece and 1 U-profile with screw-on surface coated surface in RAL 9006 smooth

€35.89*
Bild folgt.png
Accessories K-L-A-LI-AW57RO
The bracket K-L-A-LI-AW57RO is an accessory for the linear actuator EA-L. Function: Bracket set for SCHÜCO AWS-57-ro profile series on left secondary closing edge for EA-L linear drive Bracket K-L-A-LI-AW57RO at a glance: for side mounting on Schüco AW 57 ro profile - left can be clamped at the side for pivotable mounting infinitely variable positioning consisting of clamping piece and 1 U-profile with screw-on surface Surface coated in RAL 9006 smooth

€78.52*
Bild folgt.png
Accessories K-L-A-RE-AW57RO
The bracket K-L-A-RE-AW57RO is an accessory for the linear actuator EA-L. Function: Bracket set for SCHÜCO AWS-57-ro profile series on right-hand secondary closing edge for EA-L linear drive Bracket K-L-A-LI-AW57RO at a glance: for side mounting on Schüco AW 57 ro profile - right-hand side can be clamped at the side for pivotable mounting infinitely variable positioning consisting of clamping piece and 1 U-profile with screw-on surface Surface coated in RAL 9006 smooth

€78.52*
Bild folgt.png
Accessories K-L-RAICO105D-L
The bracket K-L-RAICO105D-LI-9006 (left) is an accessory for the linear actuator EA-L. Function: Bracket set for profile series RAICO 105D on left secondary closing edge for linear drive EA-L Bracket K-L-RAICO105D-LI-9006 (left) at a glance: for Raico Wing 105D for mounting on the left-hand side

€127.87*
Bild folgt.png
Accessories K-L-RAICO105D-RE-9006 (right)
The bracket K-L-RAICO105D-RE-9006 (right) is an accessory for the linear actuator EA-L. Function: Bracket set for profile series RAICO 105D on right-hand secondary closing edge for linear drive EA-L Special bracket K-L-RAICO105D-RE-9006 (right) at a glance: Special bracket linear drive for mounting on the right-hand side

€127.87*
K2 1585-0.png
Accessories K-L-UK-180
Bracket set K-L-UK-180 with clamping ring and mounting bracket. Function: Lower bracket set with clamping ring and mounting bracket for PA-L-180 Bracket set K-L-UK-180 at a glance: Lower bracket set for heavy-duty operator PA-L-180 incl. mounting bracket and screws can be clamped at the side for rotatable mounting infinitely variable positioning consisting of clamping piece and a U-profile with screw-on surface Surface coated in RAL 9006 smooth

€103.19*
Bild folgt.png
Accessories KA-EA-L-***/***-M
Accessories KA-EA-L-***/***-M for EA-L 120 Surcharge for eyebolt EA-L, for centre mounting on a double slat KA-EA-L-***/***-M at a glance: Eyebolt, loose for centre mounting

€13.46*
Bild folgt.png
Accessories KA-EA-L-***/***-S
Accessories for EA-L 120 Surcharge for eyebolt EA-L, loose, for side mounting on a single louvre KA-EA-L-***/***-S at a glance: Eyebolt, loose for side mounting

€13.46*
Bild folgt.png
Accessories UKU-740
The U-profile type UKU-740 is an accessory for the linear actuator EA-L. Function: U-profile for linear actuator EA-L, incl. aluminium sliding piece, length=740 mm U-profile UKU-740 at a glance: U-profile for linear actuator EA-L, type UKU-740 for rear motor mounting U-profile 50 x 50 x 50 x 5 mm Length 740 mm incl. aluminium sliding piece 2 stud bolts and nuts Aluminium, anodised Attention: This is the U-profile for a drive with 500 mm stroke! A special version of the mounting U-profile is required for other strokes!

€61.69*
K2 1681-0.png
Adapter plate Z-K-KL2-DP10
The Z-K-KL²-DP10 is an adapter plate for the folding arm. It is 10 mm thick. Function: Spacer plate 10 mm for mounting the lower spherical plain bearing

€13.46*
K2 1682-0.png
Adapter plate Z-K-KL2-DP17
The Z-K-KL2-DP17 is an adapter plate for the folding arm. It is 17 mm thick. Function: Spacer plate 17 mm for mounting the lower spherical plain bearing

€19.06*
K2 1683-0.png
Adapter plate Z-K-KL2-DP22
The Z-K-KL2-DP22 is an adapter plate for the folding arm. It is 22 mm thick. Function: Spacer plate 22 mm for mounting the lower spherical plain bearing

€21.31*
K2 1617-0.png
Adapter plate Z-K-KL2-DP25
The Z-K-KL2-DP25 is an adapter plate for the folding arm. It is 25 mm thick. Function: 25 mm spacer plate for mounting the lower spherical plain bearing

€23.55*
K2 1680-0.png
Adapter plate Z-K-KL2-DP5
The Z-KL-KL²-DP5 is an adapter plate for the folding arm. It is 5 mm thick. Function: 5 mm spacer plate for mounting the lower spherical plain bearing

€12.34*
B5 6141-0.png
Additional electric locking device ZVK-LOCK-A
The ZVK-LOCK-A is an additional electric locking device that actuates the window's own locking hinge and automatically activates the subsequent opener drive. The locking mechanism is installed on the outside. The locking system can be used in SHEV and ventilation areas. Integrated sequence control for controlling 24 VDC drives The sequence controller for the connected 24 V DC drive technology with a total current of up to 6 amps is integrated in the ZVK-LOCK locking drive. The sequence controller enables the control of electromechanical drives with potential-free feedback contact in a fixed sequence. This is necessary, for example, if the drives are to open in a certain sequence and close again in the reverse sequence.

€274.78*
B5 6140-0.png
Additional electric locking device ZVK-LOCK-I
The ZVK-LOCK-I is an additional electric locking device that actuates the window's own locking hinge and automatically activates the subsequent opener drive. The locking mechanism is installed on the inside. The locking system can be used in SHEV and ventilation areas. Integrated sequence control for controlling 24 VDC drives The sequence controller for the connected 24 V DC drive technology with a total current of up to 6 amps is integrated in the ZVK-LOCK locking drive. The sequence controller enables the control of electromechanical drives with potential-free feedback contact in a fixed sequence. This is necessary, for example, if the drives are to open in a certain sequence and close again in the reverse sequence.

€274.78*
B5 6108-0.png
Additional electric locking PA-ZV-UNI
The PA-ZV-UNI is an additional electric locking device for securing large and wide sashes with an additional locking point. In the standard version, it can be combined with all electric drives that provide an F-contact or a potential-free contact in the closed position. On electromechanical drives, the sequence control can switch 6 A and control two folding arms, for example. Versatile installation options for the connecting cable The PA-ZV-UNI has the SICO-PLUG connector for surface-mounted wiring. The drive can be mounted very flexibly in all directions on the window using the combination covers on the fitting profile. This gives the service technician and planner a great deal of freedom in preparation and realisation. Self-adhesive points are supplied for mounting the additional locking mechanism so that the enclosed mounting plate of the PA-ZV-UNI can be pre-positioned on the window without any tools. The mounting plate allows installation for both inward-opening and outward-opening windows. The enlarged locking part also makes installation easier. Despite this, the PA-ZV-UNI has smaller dimensions and is less conspicuous on the window. As there is at least five millimetres of space between the locking mechanism and the locking part, positioning on the sash is unproblematic. Furthermore, readjustment is no longer necessary. Advantages of the new PA-ZV-UNI Same small space requirement on the window profile and frame. For inward and outward opening sashes Pre-positioning without tools and free choice of substrate by using the fixing plate: aluminium, PVC or timber Individually selectable surface-mounted installation position of the locking mechanism Simplified installation thanks to visually appealing combination covers. These combine installation on the fixing plate with the SICO PLUG electrical connection. Fast locking and unlocking Sash projection over +/- 30 mm sash possible unproblematic settling on the window sash, as there is sufficient clearance for the fixing block Advantages of the SICO PLUG Connection of the supply line only necessary after complete mechanical installation Specially developed plug system for universal use with SIMON PROtec PA products Smallest dimensions for up to six cores Variable termination insert with strain relief for one six-core, one three-core or two-core cables Flush termination with snap-in function

€319.65*

Buy folding arm drives & chain drives from Simon Protec

Maximise efficiency and comfort with leading SHEV solutions

As your trusted partner for high quality drive technology, we are pleased to announce that Simon Protec's renowned SHEV solutions are now available at Lineardirect. Simon Protec, a leading manufacturer in this field, has made a name for itself with innovative and reliable drives for smoke and heat extractors and for the automation of windows and skylight domes. 

Wide range of drives for every requirement

At Lineardirect, we understand that every project has its own requirements. That's why we offer a comprehensive range of Simon Protec products, including: 

Robust folding arm actuators

Simon Protec's hinged arm actuators offer an optimal solution for a wide range of applications: Whether for everyday ventilation or smoke extraction in emergency situations, they are designed for reliability and ease of use. Ideal for recesses or floor flaps, these drives enable precise opening and closing and are therefore an indispensable component of modern building automation.

The folding arm² electric strike - effortless handling and automatic activation of doors without compromise

The PA-KL²-T folding arm² electric strike combines elegance and efficiency in a compact electromechanical drive. Designed for the smooth opening of doors, it supports natural smoke evacuation through automated air supply in emergency situations. With its robust kinematics and powerful gearbox, this operator is also ideal for continuous use on heavy, self-closing doors. In normal operation, the door opener enables unimpeded manual use of the door, which can be used quickly and reliably as an escape route in the event of a fire. The intuitive programming interface guarantees flexible adaptation to individual project requirements and at the same time offers an additional level of security for demanding applications thanks to the potential-free contacts and adaptability of the opening stroke.

Versatile chain drives 

Chain drives from Simon Protec stand for flexibility and performance in the automated control of opening elements. Whether for windows, skylight domes or ventilation flaps - these drives adapt effortlessly to a wide range of conditions and enable smooth operation. Their compact design and ability to work effectively in even the tightest of spaces make them a favourite choice for projects that require a reliable solution that is easy to integrate. With the chain drives from Simon Protec, now also available from Lineardirect, you benefit from a combination of advanced technology and versatility.  

Powerful spindle drives

For more complex and demanding applications, spindle drives from Simon Protec are the ideal choice. They deliver the power and precision required to move even heavy elements reliably and accurately. Their robust design and fine controllability make them particularly suitable for tasks where high load movement and precise positioning are required. This makes them a favoured system in the automation of windows, domelights and other opening elements in buildings where stability and reliability are paramount. Available via Lineardirect, our spindle drives enable easy integration into your projects, guarantee longevity and offer the security of a leading manufacturer.

Intuitive control systems for precise control

Simon Protec's high-quality drive solutions include not only mechanical components, but also advanced control systems. These intelligent control systems are at the heart of drive technology and ensure smooth operation and strict compliance with safety requirements. 

With the Simon Protec control systems offered by Lineardirect, you can significantly increase the efficiency and functionality of your projects. These modern control systems enable intuitive operation and can be seamlessly integrated into existing building management systems for optimum customisation and ease of use . Rely on Lineardirect to take your drive solutions to a new level of technology and reliability with Simon Protec's intelligent control systems.  

Lineardirect: Your one-stop shop for drive technology solutions 

Discover the entire Simon Protec range directly in our online shop. With the convenience of an easy and secure shopping experience, Lineardirect offers you an extensive selection of drives and controls that will make your building more efficient, safer and more comfortable. Trust in quality and expertise

At Lineardirect, we take great care to offer you only the best products. Simon Protec's German engineering expertise is synonymous with quality and innovation - two characteristics that are also emphasised at Lineardirect. Use Simon Protec's advanced technology for your projects and enjoy the security that only leading manufacturers can offer.

Lineardirect
This website uses cookies to ensure the best experience possible. More information...