The upper bracket DAS is an accessory for the linear actuator type EA-L
Function:
Upper bracket, type DAS, wing bracket for upper motor mounting EA-L, snap-on design
Overview of upper bracket DAS:
upper bracket for linear actuator type EA-L
galvanised
with wing bracket
incl. stud bolt (d=6 mm) for spindle fastening
Accessories Rack and pinion drive EA-SZ-M-1000
Rack and pinion drive EA-SZ-M-1000 at a glance:
EA-SZ-M-1000 rack and pinion carrier, type EA-SZ-M
with eye bolt (d=6 mm)
incl. brackets (upper and lower bracket)
Console bearing point not adjustable
not suitable for LO drives!
Attention! Different brackets for SZ and SZ-M
EA-SZ-M-350 rack and pinion carrier for rack and pinion drive
Rack and pinion drive EA-SZ-M-350 at a glance:
Rack and pinion drive, type EA-SZ-M
with eyebolt d=6 mm
upper and lower bracket included in the scope of delivery
non-adjustable bracket bearing point
not suitable for LO drives
Accessories Rack and pinion drive EA-SZ-M-550
Rack and pinion drive EA-SZ-M-550 at a glance:
Rack and pinion carrier type EA-SZ-M
with eye bolt (d=6 mm)
incl. upper and lower bracket
Console bearing point not adjustable
not suitable for LO drives!
Attention! Different brackets for SZ and SZ-M
Accessories Rack and pinion drive EA-SZ-M-750
Rack and pinion drive EA-SZ-M-750 at a glance:
Rack and pinion carrier type EA-SZ-M
with eye bolt (d=6 mm)
incl. upper and lower bracket
Console bearing point not adjustable
not suitable for -LO drives!
Attention! Different brackets for SZ and SZ-M
Connecting shaft between EA-SZ and EA-SZ-M, length 1000 mm (aluminium tube length 966 mm)
EA-SZ-VERBIND-1 accessories at a glance:
Connecting shaft between SZ and SZ-M
Aluminium tube length 966 mm
Intermediate lengths not possible
not suitable for -LO drives
Connecting shaft between EA-SZ and EA-SZ-M, length 2000 mm (aluminium tube length 1,966 mm)
EA-SZ-VERBIND-2 accessories at a glance:
Connecting shaft between SZ and SZ-M
Aluminium tube length 1,966 mm
Intermediate lengths not possible
not suitable for -LO drives
Accessories Rear bracket HK-L for linear actuator EA-L and EA-L/S.
Function:
Rear bearing bracket for linear and slotted actuators EA-L / EA-L/S
HK-L bracket at a glance:
lower bracket (type UK) for linear actuator EA-L and EA-L/S
can be clamped laterally for rotatable mounting
infinitely variable positioning
consisting of clamping piece and 1 U-profile with screw-on surface
coated surface in RAL 9006 smooth
The bracket K-L-A-LI-AW57RO is an accessory for the linear actuator EA-L.
Function:
Bracket set for SCHÜCO AWS-57-ro profile series on left secondary closing edge for EA-L linear drive
Bracket K-L-A-LI-AW57RO at a glance:
for side mounting on Schüco AW 57 ro profile - left
can be clamped at the side for pivotable mounting
infinitely variable positioning
consisting of clamping piece and 1 U-profile with screw-on surface
Surface coated in RAL 9006 smooth
The bracket K-L-A-RE-AW57RO is an accessory for the linear actuator EA-L.
Function:
Bracket set for SCHÜCO AWS-57-ro profile series on right-hand secondary closing edge for EA-L linear drive
Bracket K-L-A-LI-AW57RO at a glance:
for side mounting on Schüco AW 57 ro profile - right-hand side
can be clamped at the side for pivotable mounting
infinitely variable positioning
consisting of clamping piece and 1 U-profile with screw-on surface
Surface coated in RAL 9006 smooth
The bracket K-L-RAICO105D-LI-9006 (left) is an accessory for the linear actuator EA-L.
Function:
Bracket set for profile series RAICO 105D on left secondary closing edge for linear drive EA-L
Bracket K-L-RAICO105D-LI-9006 (left) at a glance:
for Raico Wing 105D
for mounting on the left-hand side
The bracket K-L-RAICO105D-RE-9006 (right) is an accessory for the linear actuator EA-L.
Function:
Bracket set for profile series RAICO 105D on right-hand secondary closing edge for linear drive EA-L
Special bracket K-L-RAICO105D-RE-9006 (right) at a glance:
Special bracket linear drive
for mounting on the right-hand side
Bracket set K-L-UK-180 with clamping ring and mounting bracket.
Function:
Lower bracket set with clamping ring and mounting bracket for PA-L-180
Bracket set K-L-UK-180 at a glance:
Lower bracket set for heavy-duty operator PA-L-180
incl. mounting bracket and screws
can be clamped at the side
for rotatable mounting
infinitely variable positioning
consisting of clamping piece and a U-profile with screw-on surface
Surface coated in RAL 9006 smooth
Accessories KA-EA-L-***/***-M for EA-L 120
Surcharge for eyebolt EA-L, for centre mounting on a double slat
KA-EA-L-***/***-M at a glance:
Eyebolt, loose
for centre mounting
Accessories for EA-L 120
Surcharge for eyebolt EA-L, loose, for side mounting on a single louvre
KA-EA-L-***/***-S at a glance:
Eyebolt, loose
for side mounting
The U-profile type UKU-740 is an accessory for the linear actuator EA-L.
Function:
U-profile for linear actuator EA-L, incl. aluminium sliding piece, length=740 mm
U-profile UKU-740 at a glance:
U-profile for linear actuator EA-L, type UKU-740
for rear motor mounting
U-profile 50 x 50 x 50 x 5 mm
Length 740 mm
incl. aluminium sliding piece
2 stud bolts and nuts
Aluminium, anodised
Attention: This is the U-profile for a drive with 500 mm stroke! A special version of the mounting U-profile is required for other strokes!
The Z-K-KL²-DP10 is an adapter plate for the folding arm. It is 10 mm thick.
Function:
Spacer plate 10 mm for mounting the lower spherical plain bearing
The Z-K-KL2-DP17 is an adapter plate for the folding arm. It is 17 mm thick.
Function:
Spacer plate 17 mm for mounting the lower spherical plain bearing
The Z-K-KL2-DP22 is an adapter plate for the folding arm. It is 22 mm thick.
Function:
Spacer plate 22 mm for mounting the lower spherical plain bearing
The Z-K-KL2-DP25 is an adapter plate for the folding arm. It is 25 mm thick.
Function:
25 mm spacer plate for mounting the lower spherical plain bearing
Extension of the PA-KL² and EA-KL² for ball-proof use in accordance with DIN 18032-3 in sports halls
Surcharge for ball impact resistance according to DIN 18032-3 for PA-KL²
The EA230-K-30/1000 is an electric motorised chain drive for opening and closing windows and flaps for smoke and heat extraction and for controlled natural ventilation. The EA230-K-30/1000 chain drive with its 230 V AC is designed for ventilation applications. The solo drive is characterised by its extremely low power consumption. The EA230-K-30/1000 has a pull and push force of 300 N. The stroke is 1000 mm. The stroke length of the actuator can be shortened by 100 mm or 200 mm using DIP switches.
The drive for demanding objects
With its extremely smooth running and low noise levels, the EA230-K-30 chain drive opens and closes windows and flaps almost silently. The drive also has a soft start and a soft-close function for seal relief. Visually, the EA230-K-30/1000 chain drive blends seamlessly into its surroundings. The compact, elegant aluminium housing makes the chain drive particularly suitable for sophisticated building designs.
The EA230-K-30 at a glance:
- Soft start
- Extremely smooth running
- Low noise
- Soft close
- Electronic zero-point reset
- Stroke reduction via DIP switch
Consoles not included
Chain drives - powerful window openers
The PA-K-50 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-50 chain drives are equipped with a rigid chain.
PA-K-50 chain drives with SICO LINK software interface
The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides.
PA-K-50 chain drives can be used with additional interlocks
The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlock drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are ideal for use in demanding residential and commercial properties.
Powerhouse with 500 N - performance features of the PA-K-50/1000 chain drive
The PA-K-50/1000 chain drive is a solo drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 500 N, the PA-K-50/1000 chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1000 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.
€512.56*
US$541.37
This website uses cookies to ensure the best experience possible. More information...
