The upper bracket DAS is an accessory for the linear actuator type EA-L
Function:
Upper bracket, type DAS, wing bracket for upper motor mounting EA-L, snap-on design
Overview of upper bracket DAS:
upper bracket for linear actuator type EA-L
galvanised
with wing bracket
incl. stud bolt (d=6 mm) for spindle fastening
Accessories Rack and pinion drive EA-SZ-M-1000
Rack and pinion drive EA-SZ-M-1000 at a glance:
EA-SZ-M-1000 rack and pinion carrier, type EA-SZ-M
with eye bolt (d=6 mm)
incl. brackets (upper and lower bracket)
Console bearing point not adjustable
not suitable for LO drives!
Attention! Different brackets for SZ and SZ-M
EA-SZ-M-350 rack and pinion carrier for rack and pinion drive
Rack and pinion drive EA-SZ-M-350 at a glance:
Rack and pinion drive, type EA-SZ-M
with eyebolt d=6 mm
upper and lower bracket included in the scope of delivery
non-adjustable bracket bearing point
not suitable for LO drives
Accessories Rack and pinion drive EA-SZ-M-550
Rack and pinion drive EA-SZ-M-550 at a glance:
Rack and pinion carrier type EA-SZ-M
with eye bolt (d=6 mm)
incl. upper and lower bracket
Console bearing point not adjustable
not suitable for LO drives!
Attention! Different brackets for SZ and SZ-M
Accessories Rack and pinion drive EA-SZ-M-750
Rack and pinion drive EA-SZ-M-750 at a glance:
Rack and pinion carrier type EA-SZ-M
with eye bolt (d=6 mm)
incl. upper and lower bracket
Console bearing point not adjustable
not suitable for -LO drives!
Attention! Different brackets for SZ and SZ-M
Connecting shaft between EA-SZ and EA-SZ-M, length 1000 mm (aluminium tube length 966 mm)
EA-SZ-VERBIND-1 accessories at a glance:
Connecting shaft between SZ and SZ-M
Aluminium tube length 966 mm
Intermediate lengths not possible
not suitable for -LO drives
Connecting shaft between EA-SZ and EA-SZ-M, length 2000 mm (aluminium tube length 1,966 mm)
EA-SZ-VERBIND-2 accessories at a glance:
Connecting shaft between SZ and SZ-M
Aluminium tube length 1,966 mm
Intermediate lengths not possible
not suitable for -LO drives
Accessories Rear bracket HK-L for linear actuator EA-L and EA-L/S.
Function:
Rear bearing bracket for linear and slotted actuators EA-L / EA-L/S
HK-L bracket at a glance:
lower bracket (type UK) for linear actuator EA-L and EA-L/S
can be clamped laterally for rotatable mounting
infinitely variable positioning
consisting of clamping piece and 1 U-profile with screw-on surface
coated surface in RAL 9006 smooth
The bracket K-L-A-LI-AW57RO is an accessory for the linear actuator EA-L.
Function:
Bracket set for SCHÜCO AWS-57-ro profile series on left secondary closing edge for EA-L linear drive
Bracket K-L-A-LI-AW57RO at a glance:
for side mounting on Schüco AW 57 ro profile - left
can be clamped at the side for pivotable mounting
infinitely variable positioning
consisting of clamping piece and 1 U-profile with screw-on surface
Surface coated in RAL 9006 smooth
The bracket K-L-A-RE-AW57RO is an accessory for the linear actuator EA-L.
Function:
Bracket set for SCHÜCO AWS-57-ro profile series on right-hand secondary closing edge for EA-L linear drive
Bracket K-L-A-LI-AW57RO at a glance:
for side mounting on Schüco AW 57 ro profile - right-hand side
can be clamped at the side for pivotable mounting
infinitely variable positioning
consisting of clamping piece and 1 U-profile with screw-on surface
Surface coated in RAL 9006 smooth
The bracket K-L-RAICO105D-LI-9006 (left) is an accessory for the linear actuator EA-L.
Function:
Bracket set for profile series RAICO 105D on left secondary closing edge for linear drive EA-L
Bracket K-L-RAICO105D-LI-9006 (left) at a glance:
for Raico Wing 105D
for mounting on the left-hand side
The bracket K-L-RAICO105D-RE-9006 (right) is an accessory for the linear actuator EA-L.
Function:
Bracket set for profile series RAICO 105D on right-hand secondary closing edge for linear drive EA-L
Special bracket K-L-RAICO105D-RE-9006 (right) at a glance:
Special bracket linear drive
for mounting on the right-hand side
Bracket set K-L-UK-180 with clamping ring and mounting bracket.
Function:
Lower bracket set with clamping ring and mounting bracket for PA-L-180
Bracket set K-L-UK-180 at a glance:
Lower bracket set for heavy-duty operator PA-L-180
incl. mounting bracket and screws
can be clamped at the side
for rotatable mounting
infinitely variable positioning
consisting of clamping piece and a U-profile with screw-on surface
Surface coated in RAL 9006 smooth
Accessories KA-EA-L-***/***-M for EA-L 120
Surcharge for eyebolt EA-L, for centre mounting on a double slat
KA-EA-L-***/***-M at a glance:
Eyebolt, loose
for centre mounting
Accessories for EA-L 120
Surcharge for eyebolt EA-L, loose, for side mounting on a single louvre
KA-EA-L-***/***-S at a glance:
Eyebolt, loose
for side mounting
The U-profile type UKU-740 is an accessory for the linear actuator EA-L.
Function:
U-profile for linear actuator EA-L, incl. aluminium sliding piece, length=740 mm
U-profile UKU-740 at a glance:
U-profile for linear actuator EA-L, type UKU-740
for rear motor mounting
U-profile 50 x 50 x 50 x 5 mm
Length 740 mm
incl. aluminium sliding piece
2 stud bolts and nuts
Aluminium, anodised
Attention: This is the U-profile for a drive with 500 mm stroke! A special version of the mounting U-profile is required for other strokes!
The EA-L-450/1000 linear actuator was designed for installation on building covers. These can be inward and outward opening windows, for example. The EA-L-450/1000 linear actuator is also well suited for installation and operation in smoke vents. It can be used with the SHEV and/or ventilation control systems from SIMON PROtec Systems GmbH.
High running speed for effective use
The high running speed of the EA-L-450/1000 and the flexible mounting of the housing (anodised aluminium tube) are particularly impressive. The multifunctional groove allows the connecting cable to be laid almost invisibly.
Quality features in accordance with DIN EN 12102-2, such as temperature resistance and continuous load capacity, are a matter of course. In addition, the linear actuator has been equipped with a special cut-out with a current consumption of 0.5 A.
Please order brackets for the linear actuator separately!
Your benefits at a glance:
Maximum force despite small diameter
Invisible routing of the connection cable
Flexible fastening technology
Integrated load cut-off
300 N/1,000 mm in less than 60 seconds
Flexible bracket sets
The EA-L-450/300 is a linear actuator that is ideal for mounting on building covers, e.g. inward and outward opening windows, for installation and for use in smoke vents.
There is a multifunctional groove on the outside of the housing (anodised aluminium tube) that allows invisible routing and flexible attachment of the connecting cable.
Wide range of mounting options
The actuator is housed in a special aluminium tube with an integrated multifunctional groove. A special cut-off with a 0.5 A current consumption and a high running speed are also key advantages of this linear actuator. High temperature resistance and continuous load capacity are also a matter of course. The integrated load cut -off prevents the current values from being exceeded by switching off the drive.
Versatile linear actuator thanks to combinations
The EA-L linear actuator can be combined with the EA-LF-L linear guide. This allows precisely guided and vertical lifting, e.g. of glass structures or roof elements. SIMON PROtec Systems offers the EA-L-120 linear actuator for installation on louvre windows.
Advantages at a glance:
Maximum force despite small diameter
Invisible installation of the connecting cable
Flexible fastening technology
Integrated load cut-off
Flexible bracket sets
The EA-L-450/500 is a linear actuator for mounting on building covers, e.g. inward and outward opening windows, for installation and for use in smoke vents. It can be used with the SHEV and/or ventilation control units from SIMON PROtec Systems GmbH.
Protected drive for increased safety
The drive is protected in a housing made of anodised aluminium tubing. There is a multifunctional groove on the outside of the housing, which enables flexible mounting and almost invisible routing of the connecting cable. In addition, the EA-L-450/500 linear actuator is equipped with a special cut-out with a current consumption of 0.5 A and impresses with its high running speed. A high continuous load capacity and temperature resistance are a matter of course. Exceeding the current values is prevented by an integrated load cut-off.
Please order brackets for the linear actuator separately!
Advantages at a glance:
Maximum force despite small diameter
Invisible installation of the connecting cable
Flexible fastening technology
Integrated load cut-off
Flexible bracket sets
The EA-L-450/750 linear actuator is suitable for mounting on building covers, e.g. inward and outward-opening windows, for installation and for use in smoke vents. It can be used with the ventilation controls and/or SHEV systems from SIMON PROtec Systems GmbH.
Invisible installation and flexible fastening of the connection cable
On the outside of the housing - an anodised aluminium tube - there is a multifunctional groove that enables invisible installation and flexible fasten ing of the connecting cable. The drive is equipped with a special cut-out with a 0.5 A current consumption and impresses with its high running speed. Continuous load capacity and temperature resistance are just some of the quality features in accordance with DIN EN 12101-2.
Please order brackets for the linear actuator separately!
Your benefits at a glance:
Maximum force despite small diameter
Invisible installation of the connecting cable
Flexible fastening technology
Integrated load cut-off
300 N/1,000 mm in less than 60 seconds
Flexible bracket sets
The standard actuator with 1000 N and 1000 mm stroke and proven SICO-BUS technology. Simple operation and flexible application make the PA-L an all-rounder.
Flexible mounting technology for a wide range of installation options
The actuator is located in a special aluminium tube with an integrated multifunctional groove. This enables flexible fastening technology and invisible installation of the connecting cable.
The PA-L linear actuator also leaves nothing to be desired in terms of performance. Despite its small diameter, it delivers maximum force and high speed. An integrated load cut-off prevents the current values from being exceeded by switching off the actuator.
Parameterisation and synchronisation made easy
With the SICO Link software interface, the PA series drives can be set and synchronised quickly and easily.
Advantages at a glance:
maximum force despite small diameter
easy to parameterise via SICO Link
flexible fastening technology
integrated load cut-off
synchronised drive
flexible bracket sets
The PA-L-100/1000-S is a linear actuator in a special aluminium tube with an integrated multifunctional groove. This installation enables flexible mounting and almost invisible routing of the connecting cable.
The push tube is extended and retracted via the internal spindle. During this process, the actuator has a force of 1000 N in the pushing direction. The integrated electronic load cut-off monitors the actuator's current consumption and switches it off in the event of an overload.
Synchro actuator with integrated synchronisation control
The PA-L-100/1000-S is a synchronised actuator with integrated synchronisation control. This synchronisation control enforces synchronous operation of two, three or four electromechanical linear actuators, which are speed-controlled. If one of the interconnected drives is overloaded, a connecting wire switches off the drive group (combination of up to four drives).
Please order brackets separately.
Your benefits at a glance:
Maximum force despite small diameter
Invisible installation of the connecting cable
Flexible fastening technology
Integrated load cut-off
Force of 1000 N
Flexible bracket sets
The standard actuator with 1000 N and 120 mm stroke as well as proven SICO-BUS technology. Simple operation and flexible application make the PA-L an all-rounder.
Flexible mounting technology for a wide range of installation options
The actuator is located in a special aluminium tube with an integrated multifunctional groove. This enables flexible fastening technology and invisible installation of the connecting cable.
The PA-L linear actuator also leaves nothing to be desired in terms of performance. Despite its small diameter, it delivers maximum force and high speed. An integrated load cut-off prevents the current values from being exceeded by switching off the actuator.
Parameterisation and synchronisation made easy
With the SICO Link software interface, the PA series drives can be set and synchronised quickly and easily.
Advantages at a glance:
maximum force despite small diameter
easy to parameterise via SICO Link
flexible fastening technology
integrated load cut-off
synchronised drive
flexible bracket sets
The PA-L-100/120-S is a linear actuator in a special aluminium tube with an integrated multifunctional groove. This installation enables flexible mounting and almost invisible routing of the connecting cable.
The push tube is extended and retracted via the internal spindle. During this process, the actuator has a force of 1000 N in the pushing direction. The integrated electronic load cut-off monitors the actuator's current consumption and switches it off in the event of an overload.
Synchro drive with integrated synchronisation control
The PA-L-100/120-S is a synchronised actuator with integrated synchronisation control. This synchronisation control enforces synchronous operation of two, three or four electromechanical linear actuators, which are speed-controlled. If one of the interconnected drives is overloaded, a connecting wire switches off the drive group (combination of up to four drives).
Please order brackets separately.
Your benefits at a glance:
Maximum force despite small diameter
Invisible installation of the connecting cable
Flexible fastening technology
Integrated load cut-off
Force of 1000 N
Flexible bracket sets
€425.08*
US$448.97
This website uses cookies to ensure the best experience possible. More information...
