Linear actuator EA-L-450/500
The EA-L-450/500 is a linear actuator for mounting on building covers, e.g. inward and outward opening windows, for installation and for use in smoke vents. It can be used with the SHEV and/or ventilation control units from SIMON PROtec Systems GmbH.
Protected drive for increased safety
The drive is protected in a housing made of anodised aluminium tubing. There is a multifunctional groove on the outside of the housing, which enables flexible mounting and almost invisible routing of the connecting cable. In addition, the EA-L-450/500 linear actuator is equipped with a special cut-out with a current consumption of 0.5 A and impresses with its high running speed. A high continuous load capacity and temperature resistance are a matter of course. Exceeding the current values is prevented by an integrated load cut-off.
Please order brackets for the linear actuator separately!
Advantages at a glance:
- Maximum force despite small diameter
- Invisible installation of the connecting cable
- Flexible fastening technology
- Integrated load cut-off
- Flexible bracket sets
| Ambient temperature range: | -5 °C - 75 °C |
|---|---|
| Color: | On request |
| Compressive force: | 450 N |
| Duty cycle: | 30 % |
| Housing: | continuous aluminium profile tube in EV1 anodised |
| Housing height: | 42 mm |
| Housing length: | 863 mm |
| Housing type: | Aluminium |
| Housing width: | 36 mm |
| Input voltage: | 24 V DC |
| Input voltage range: | - 15 % / + 15 % |
| Mounting type: | set up |
| Nominal locking force: | 1000 N |
| Nominal operating temperature: | 20 °C |
| Protection class: | III |
| Protection class: | IP54 |
| Rated current: | 0.5 A |
| Running speed: | 5 mm/s |
| Stroke length: | 500 mm |
| Switch off: | electronic and potential feedforward "F |
| Tractive force: | 450 N |
Login
Accessories
