Buy Linak control unit

With a Linak control unit you can operate Linak products and connect them to the mains using a cold appliance cable available from us.

Linak control unit for multiple operation

With a Linak control unit you can synchronously control 2 to 4 Linak DESKLINE drives in parallel, depending on the series. By using 3x Linak multiparallel cables you can control up to 16 Linak actuators in parallel and synchronously with 4x CBD6S 4-fold control unit. You can buy the latest Linak control unit CBD6S online at LinearDirect. We have among others Linak, Baumeister & Schack and TiMotion control units on this page.

Control service and advice

If you have specific questions about a Linak control unit, we look forward to hearing from you. As a Linak specialist, we will advise you comprehensively and leave no questions unanswered.

Baumeister & Schack Compact1EU Steuerung.JPG

Baumeister & Schack motor control for one 1 / 1 lifting column

€314.76*

Baumeister & Schack motor control US version for 2 motors / 2 lifting columns

Baumeister & Schack Synchronous Motor Control US Version 120V for 2 motors / 2 lifting columns

€535.20*

Baumeister & Schack motor synchro control for 2 motors / 2 lifting columns

€327.85*

Baumeister & Schack Compact3 EU Steuerung

Baumeister & Schack motor synchro control for 3 motors / 3 lifting columns

€302.26*

Linak DESKLINE® Control Unit CBD6S-2 SMPS black 200 W

Lightweight and slim control box designed for LINAK actuator systems. Plug & play compatible with all Linak linear actuators for tables and workstations and other projects in which a lifting column can be used. Low standby power (<0.1W), PVC-free, and low-noise performance. The control unit is compatible with all Linak DESKLINE® lifting columns DL4S/DL11XL etc. With the Linak programming cable, you can use software and a computer / laptop to programme lower and upper end positions and also adjust the running speed. The LINAK CBD6S control box replaces the LINAK CBD4 control box that was available until 2015. You can also connect older LINAK tables where the LINAK CBD4 control box is defective. The LINAK CBD6S is compatible with LINAK actuators that were previously controlled with the CBD4.

€109.90*

Linak CBD6S 4 fach Steuerung 300 Watt Linaerdirect.JPG

Linak DESKLINE® Control Unit CBD6S-4 SMPS black 300 W

Lightweight and slim control box designed for LINAK actuator systems. Plug & play compatible with all Linak linear actuators for tables and workstations and other projects in which a lifting column can be used. Low standby power (<0.1W), PVC-free, and low-noise performance. The control unit is compatible with all Linak DESKLINE® lifting columns DL4S/DL11XL etc. With the Linak programming cable you can use software and a computer / laptop to programme lower and upper end positions and also adjust the running speed. The LINAK CBD6S control box replaces the LINAK CBD4 control box that was available until 2015. You can also connect older LINAK tables where the LINAK CBD4 control box is defective. The LINAK CBD6S is compatible with LINAK actuators that were previously controlled with the CBD4.

€134.90*

TiMotion TC11P Controller for 1 lift column or 1 linear actuator

TiMotion TC11P control for maximum 1 lifting column or1 linear actuator. 0.1 W standby operation.

€159.00*

TiMotion TC15P control unit for up to 2 lifting columns or 2 linear drives

TiMotion TC15P control unit for up to 2 lifting columns or 2 linear drives - synchronous operation. Integrated T-Touch sensor for collision protection. 0.1 W standby operation.

€179.00*