FLATLIFT THINLINE 100 projector lift Conceal the beamer or projector invisibly in the ceiling using the ceiling lift With the Flatlift projector ceiling lift Thinline 100 system, you can conceal projectors and projectors invisibly in the ceiling, for example in a conference room or home cinema. At the touch of a button, the projector lift extends the projector downwards and you can start your presentation or cinema evening. Quick and easy installation Surface mounting With a little manual dexterity, you can install and connect the projector lift in the ceiling. The Flatlift projector lift can also be screwed directly onto the ceiling and clad with wood or drywall. Flush-mounted installation Install the Beamerlift invisibly in the ceiling. You can also install the projector lift in the ceiling (false ceiling). The projector lift then waits there in a ceiling niche, covered with a ceiling panel so that it cannot be seen when closed. At the push of a button, the projector lift can then be pulled out of the closed ceiling to be used. Technical data: Installation dimensions: 655 mm x 558 mm x 160 mm Stroke 80 cm (adjustable) Lifting speed: 35 mm/sec Beamer weight max. 15 kg / 150 N Duty cycle 5 % Low noise level Optional connection to room control possible (blind switch / relay) The Flatlift value guarantee for carefree operation: 200.000 lifting cycles tested 5-year full guarantee VOB Proj. 6-fold soundproofed 20-year repair cost limit Scope of delivery: Flatlift Beamerlift Thinline 100 Hand-held radio transmitter Radio receiver (pre-installed) Setting pin Mains cable (pre-installed) Operating instructions download (DE and EN): DE: https://lineardirect.eu/media/d9/20/3d/1763797869/FL-10124-Bedienungsanleitung.pdf EN: https://lineardirect.eu/media/36/ea/24/1763797929/FL-10124-Manual.pdfDownload CAD drawings (3D-STP.PDF.DXF.DWG.iAM): CAD FL-10124.zip Tender texts for architects and planners:EN: PROJECTOR-CEILING-SYSTEMS Tender specifications for architects and planners - Flatlift projector ceiling lift FL-10124 Motorised projector ceiling lift system for flush and almost invisible integration of a projector in suspended ceilings, architectural panelling or technical ceilings. The FL-10124 system enables the safe lowering and raising of projectors weighing up to 15 kg and is suitable for high-quality residential, presentation and conference room installations. The lift offers a powerful, precisely controlled stroke of 800 mm, giving the projector sufficient freedom of movement for optimum projection positions. The lifting movement is quiet and low-vibration at 35 mm/sec. The end positions can be adjusted with millimetre precision to ensure perfect integration. Technical performance data Max. Projector weight: 15 kg Drive force: 150 N Lifting distance: 800 mm Lifting speed: 35 mm/sec. Stroke limit: electronically adjustable Noise emission: < 45 dB Trigger circuit: can be integrated (e.g. 12V trigger, potential-free) Installation dimensions of the system Width: 575 mm (with mounting bracket 735 mm) Depth: 555 mm Height: 160 mm Control & integration Integrated trigger circuit (12V, media controls, potential-free contacts) Compatible with KNX, Crestron, Control4, AMX, Loxone, RTI and others Ideal for AV control systems, automation systems and centralised media technology Quality & features Flush integration into suspended ceilings Quiet, low-vibration operation Robust metal construction for continuous professional use Low-maintenance lifting mechanism Guarantee 5-year full service guarantee 30 years LRL* - Long-Running-Lifetime according to Flatlift standards Product according to manufacturer's specification: Flatlift Type: Projector ceiling lift system Item no.: FL-10124

FLATLIFT THINLINE 200 projectorlift Conceal the beamer or projector invisibly in the ceiling using the ceiling lift With the Flatlift Thinline 200 projector ceiling lift system, you can conceal projectors and beamers invisibly in the ceiling, for example in a conference room or home cinema. At the touch of a button, the projector lift extends the projector downwards and you can present or start your cinema evening. Quick and easy installation Surface mounting With a little manual skill, you can install and connect the projector lift in the ceiling. The Flatlift projector lift can also be screwed directly onto the ceiling and covered with wood or drywall material. Flush-mounted installation Install the projector lift invisibly in the ceiling. You can also install the projector lift in the ceiling (false ceiling). The projector lift then waits there in a ceiling niche, covered with a ceiling panel so that it cannot be seen when closed. At the touch of a button, the projector lift then moves out of the closed ceiling to be used. Technical data: Installation dimensions: 655 mm x 558 mm x 230 mm Stroke 180 cm (adjustable) Lifting speed: 35 mm/sec Beamer weight max. 15 kg / 150 N Duty cycle 5 % Low noise level Optional connection to room control possible (blind switch / relay) The Flatlift value guarantee for carefree operation: 200.000 lifting cycles tested 5-year full guarantee VOB Proj. 6-fold soundproofed 20-year repair cost limit Scope of delivery: Flatlift Beamerlift Thinline 200 Hand-held radio transmitter Radio receiver (pre-installed) Setting pin Mains cable (pre-installed) Operating instructions Download (DE and EN): DE: https://lineardirect.eu/media/6a/06/32/1763798007/FL-10133-Bedienungsanleitung.pdf EN: https://lineardirect.eu/media/4c/05/95/1763798063/FL-10133-Manual.pdfCAD Drawings Download (3D-STP.PDF.DXF.DWG.iAM): CAD FL-10133.zip Tender texts for architects and planners:EN: PROJECTOR CEILING SYSTEMS Tender text for architects and planners - Flatlift projector ceiling lift FL-10133 The Flatlift FL-10133 is a powerful, motorised projector ceiling lift system for fully concealed integration of a projector in suspended ceilings, architectural ceilings or technical panelling. The system enables the safe lowering and raising of a projector up to 15 kg and offers maximum flexibility for large room heights or demanding installation situations thanks to its exceptionally long stroke. With a vertical stroke of 1800 mm, the FL-10133 system is one of the long-stroke special lift systems. The lifting movement is quiet, low-vibration and precise at 35 mm/sec. The end position limiter can be adjusted with millimetre precision so that the projector can be optimally adapted to the spatial conditions. Technical performance data Max. Projector weight: 15 kg Drive force: 150 N Lifting distance: 1800 mm Lifting speed: 35 mm/sec. Stroke limit: electronically adjustable Noise emission: < 45 dB Trigger circuit: can be integrated (e.g. 12V trigger, potential-free contacts) Installation dimensions of the system Width: 575 mm (with mounting bracket 735 mm) Depth: 555 mm Height: 230 mm Control & integration Integrable trigger circuit (e.g. 12V trigger, AV systems, potential-free contacts) Compatible with KNX, Crestron, AMX, Control4, Loxone, RTI, Savant and others Ideal for professional media control systems and smart building solutions Quality & features Suitable for suspended ceilings and architectural panelling Extremely quiet and stable lifting mechanism Robust construction for long-lasting, professional continuous use Low-maintenance mechanics Guarantee 5-year full service guarantee 30 years LRL* - Long-Running-Lifetime according to Flatlift specification Product according to manufacturer's specification: Flatlift Type: Projector ceiling lift Long-stroke system Item no.: FL-10133

Hide the beamer or projector invisibly in the table With the Flatlift beamer lift system for table integration, you can integrate a modern beamer or projector invisibly into the table top. At the touch of a button, the projector can be lifted out of the table surface and used. Quick and easy installation The Beamerlift system is the ideal product if, for example, you want to equip a conference room with an invisible projection system. In addition to use in a conference room, it can also be used in a home cinema. Here, the beamer or projector could be moved out of the coffee table and hidden away waiting to be used. The Flatlift projector lift system is almost silent in operation and can even move heavy projectors. Technical data: Stroke 200 mm Load capacity 60 kg Lifting speed 28 mm /sec Duty cycle 5% Soft start / soft stop Very low noise level Incl. Bluetooth remote control Connection to room control possible via potential-free switching contacts Millimetre-precise setting possible in the hub (end points) 110 V to 240 V mains voltage The Flatlift value guarantee for carefree operation: 200.000 lifting cycles tested 5-year full warranty VOB Proj. 6-fold soundproofed 20-year repair cost limit Scope of delivery: Table projector lift as a complete system Control box Power cable EU / US 4x motor cable 1x network cable Bluetooth handheld transmitter Bluetooth receiver Operating instructions download (DE and EN): DE: https://lineardirect.eu/media/d2/d4/4f/1763797692/FL-10047-Bedienungsanleitung.pdf EN: https://lineardirect.eu/media/35/76/08/1763797759/FL-10047-Manual.pdfDownload CAD drawings (3D-STP.PDF.DXF.DWG.iAM):CAD FL-10047.zip Tender texts for architects and planners:EN: PROJECTOR-CEILING-SYSTEMSTender specifications for architects and planners - Flatlift projector lift system FL-10047 The Flatlift FL-10047 is a motorised projector lift system for elegant, vertical integration of a projector in conference tables, sideboards, media technology furniture or high-quality interior design constructions. When closed, the projector remains invisibly concealed; at the touch of a button, the system moves the projector precisely, quietly and safely upwards out of the furniture. The vertical lift of 200 mm is low-vibration and precisely guided. With a lifting speed of 28 mm/sec. and integrated Soft Start & Stop technology, the system guarantees gentle and reliable mechanical operation. Thanks to its high load capacity, the FL-10047 is particularly suitable for larger projectors, including encasing. Technical performance data Max. Projector weight: up to 60 kg (incl. casing / panelling) Lifting distance: 200 mm Lifting speed: 28 mm/sec. Duty cycle: ED 5% Movement: Soft start & soft stop Noise level: Very low operating noise level Installation dimensions of the system Width: 561 mm Depth: 480 mm Height: 125 mm Installation & areas of application Integration into conference tables, sideboards, media furniture or table constructions Projector retracts and extends completely flush with the furniture Ideal for meeting rooms, presentation areas, living rooms and high-quality architecture Sturdy metal construction for professional and durable applications Control & smart home integration Connection to room controls possible (potential-free contacts) Compatible with KNX, Crestron, AMX, Loxone, Control4, Savant, RTI, etc. Triggering via AV systems, wall switches or external automation signals Quality & features Very quiet operation thanks to high-quality lifting mechanism Low vibration, precisely guided, low maintenance Heavy-duty due to robust construction Made in Germany - high-quality engineering and manufacturing quality Product according to manufacturer's specification: Flatlift Type: Projector lift system - table/furniture integration Item no.: FL-10047

FLATLIFT Ultra projector lift with 20 cm stroke for very flat suspended ceilings Conceal the beamer or projector invisibly in the ceiling using the ceiling lift With the Flatlift beamer ceiling lift ultra flat system, you can conceal projectors and beamers invisibly in a very flat ceiling, for example in a conference room or home cinema. At the touch of a button, the projector lift extends the projector downwards and you can start your presentation or cinema evening. Quick and easy installation Surface mounting With a little manual dexterity, you can install and connect the projector lift in the ceiling. The Flatlift projector lift can also be screwed directly onto the ceiling and clad with wood or drywall. Flush-mounted installation Install the Beamerlift invisibly in the ceiling. You can also install the projector lift in the ceiling (false ceiling). The projector lift then waits there in a ceiling niche, covered with a ceiling panel so that it cannot be seen when closed. At the push of a button, the projector lift can then be pulled out of the closed ceiling to be used. Technical data: Installation dimensions: 655 mm x 642 mm x 160 mm Stroke 20 cm (adjustable) Lifting speed: 35 mm/sec Beamer weight max. 15 kg / 150 N Duty cycle 5 % Low noise level Optional connection to room control possible (blind switch / relay) The Flatlift value guarantee for carefree operation: 200.000 lifting cycles tested 5-year full guarantee VOB Proj. 6-fold soundproofed 20-year repair cost limit Scope of delivery: Flatlift Beamerlift Thinline 100 Hand-held radio transmitter Radio receiver (pre-installed) Setting pin Mains cable (pre-installed) Operating instructions download (DE and EN): DE: https://lineardirect.eu/media/ba/7e/02/1763797366/FL-10060-Bedienungsanleitung.pdf EN: https://lineardirect.eu/media/26/c7/69/1763797469/FL-10060-Manual.pdfDownload CAD drawings (3D-STP.PDF.DXF.DWG.iAM):CAD FL-10060.zip Tender texts for architects and planners:EN: PROJECTOR-CEILING-SYSTEMS Tender specifications for architects and planners - Flatlift projector ceiling lift system FL-10060 Motorised ultra-flat projector ceiling lift system for flush integration of a projector in suspended ceilings, technical ceilings or architectural cladding. The FL-10060 system enables a projector weighing up to 15 kg to be raised and lowered safely and offers an elegant, almost invisible solution for high-quality presentation, living and conference rooms. The projector is motorised and extended downwards by up to 200 mm. The lifting movement is precise, low-vibration and quiet at a speed of 35 mm/sec. The end positions can be adjusted to the millimetre depending on the project. Technical performance data Max. Projector weight: 15 kg Drive force: 150 N Stroke: 200 mm Lifting speed: 35 mm/sec. Stroke limit: electronically adjustable Noise development: < 45 dB Trigger/control signal: can be integrated (e.g. 12V trigger, potential-free) Maximum projector size Height: up to 80 mm Width: up to 340 mm Depth: up to 400 mm Installation dimensions of the system System width: 575 mm (with mounting bracket 735 mm) System depth: 555 mm System height: 120 mm Control & integration Integrable trigger circuit (e.g. 12V, potential-free contacts) Compatible with building control systems: KNX, Crestron, AMX, Control4, RTI, Loxone, etc. Activation via media controls, push-buttons or automation systems Quality & features Flush integration into suspended ceilings and architectural elements Quiet and low-vibration operation High-quality, low-maintenance mechanics Ideal for conference rooms, home cinema, presentation rooms and living areas Guarantee 5-year full service guarantee 30 years LRL* (Long-Running-Lifetime according to Flatlift specification) Product according to manufacturer's specification: Flatlift Type: Projector ceiling lift system Item no.: FL-10060