The upper bracket DAS is an accessory for the linear actuator type EA-L Function: Upper bracket, type DAS, wing bracket for upper motor mounting EA-L, snap-on design Overview of upper bracket DAS: upper bracket for linear actuator type EA-L galvanised with wing bracket incl. stud bolt (d=6 mm) for spindle fastening

Accessories Rack and pinion drive EA-SZ-M-1000 Rack and pinion drive EA-SZ-M-1000 at a glance: EA-SZ-M-1000 rack and pinion carrier, type EA-SZ-M with eye bolt (d=6 mm) incl. brackets (upper and lower bracket) Console bearing point not adjustable not suitable for LO drives! Attention! Different brackets for SZ and SZ-M

EA-SZ-M-350 rack and pinion carrier for rack and pinion drive Rack and pinion drive EA-SZ-M-350 at a glance: Rack and pinion drive, type EA-SZ-M with eyebolt d=6 mm upper and lower bracket included in the scope of delivery non-adjustable bracket bearing point not suitable for LO drives

Accessories Rack and pinion drive EA-SZ-M-550 Rack and pinion drive EA-SZ-M-550 at a glance: Rack and pinion carrier type EA-SZ-M with eye bolt (d=6 mm) incl. upper and lower bracket Console bearing point not adjustable not suitable for LO drives! Attention! Different brackets for SZ and SZ-M

Accessories Rack and pinion drive EA-SZ-M-750 Rack and pinion drive EA-SZ-M-750 at a glance: Rack and pinion carrier type EA-SZ-M with eye bolt (d=6 mm) incl. upper and lower bracket Console bearing point not adjustable not suitable for -LO drives! Attention! Different brackets for SZ and SZ-M

Connecting shaft between EA-SZ and EA-SZ-M, length 1000 mm (aluminium tube length 966 mm) EA-SZ-VERBIND-1 accessories at a glance: Connecting shaft between SZ and SZ-M Aluminium tube length 966 mm Intermediate lengths not possible not suitable for -LO drives

Connecting shaft between EA-SZ and EA-SZ-M, length 2000 mm (aluminium tube length 1,966 mm) EA-SZ-VERBIND-2 accessories at a glance: Connecting shaft between SZ and SZ-M Aluminium tube length 1,966 mm Intermediate lengths not possible not suitable for -LO drives

Accessories Rear bracket HK-L for linear actuator EA-L and EA-L/S. Function: Rear bearing bracket for linear and slotted actuators EA-L / EA-L/S HK-L bracket at a glance: lower bracket (type UK) for linear actuator EA-L and EA-L/S can be clamped laterally for rotatable mounting infinitely variable positioning consisting of clamping piece and 1 U-profile with screw-on surface coated surface in RAL 9006 smooth

The bracket K-L-A-LI-AW57RO is an accessory for the linear actuator EA-L. Function: Bracket set for SCHÜCO AWS-57-ro profile series on left secondary closing edge for EA-L linear drive Bracket K-L-A-LI-AW57RO at a glance: for side mounting on Schüco AW 57 ro profile - left can be clamped at the side for pivotable mounting infinitely variable positioning consisting of clamping piece and 1 U-profile with screw-on surface Surface coated in RAL 9006 smooth

The bracket K-L-A-RE-AW57RO is an accessory for the linear actuator EA-L. Function: Bracket set for SCHÜCO AWS-57-ro profile series on right-hand secondary closing edge for EA-L linear drive Bracket K-L-A-LI-AW57RO at a glance: for side mounting on Schüco AW 57 ro profile - right-hand side can be clamped at the side for pivotable mounting infinitely variable positioning consisting of clamping piece and 1 U-profile with screw-on surface Surface coated in RAL 9006 smooth

The bracket K-L-RAICO105D-LI-9006 (left) is an accessory for the linear actuator EA-L. Function: Bracket set for profile series RAICO 105D on left secondary closing edge for linear drive EA-L Bracket K-L-RAICO105D-LI-9006 (left) at a glance: for Raico Wing 105D for mounting on the left-hand side

The bracket K-L-RAICO105D-RE-9006 (right) is an accessory for the linear actuator EA-L. Function: Bracket set for profile series RAICO 105D on right-hand secondary closing edge for linear drive EA-L Special bracket K-L-RAICO105D-RE-9006 (right) at a glance: Special bracket linear drive for mounting on the right-hand side

Bracket set K-L-UK-180 with clamping ring and mounting bracket. Function: Lower bracket set with clamping ring and mounting bracket for PA-L-180 Bracket set K-L-UK-180 at a glance: Lower bracket set for heavy-duty operator PA-L-180 incl. mounting bracket and screws can be clamped at the side for rotatable mounting infinitely variable positioning consisting of clamping piece and a U-profile with screw-on surface Surface coated in RAL 9006 smooth

Accessories KA-EA-L-***/***-M for EA-L 120 Surcharge for eyebolt EA-L, for centre mounting on a double slat KA-EA-L-***/***-M at a glance: Eyebolt, loose for centre mounting

Accessories for EA-L 120 Surcharge for eyebolt EA-L, loose, for side mounting on a single louvre KA-EA-L-***/***-S at a glance: Eyebolt, loose for side mounting

The U-profile type UKU-740 is an accessory for the linear actuator EA-L. Function: U-profile for linear actuator EA-L, incl. aluminium sliding piece, length=740 mm U-profile UKU-740 at a glance: U-profile for linear actuator EA-L, type UKU-740 for rear motor mounting U-profile 50 x 50 x 50 x 5 mm Length 740 mm incl. aluminium sliding piece 2 stud bolts and nuts Aluminium, anodised Attention: This is the U-profile for a drive with 500 mm stroke! A special version of the mounting U-profile is required for other strokes!

The Z-K-KL²-DP10 is an adapter plate for the folding arm. It is 10 mm thick. Function: Spacer plate 10 mm for mounting the lower spherical plain bearing

The Z-K-KL2-DP17 is an adapter plate for the folding arm. It is 17 mm thick. Function: Spacer plate 17 mm for mounting the lower spherical plain bearing

The Z-K-KL2-DP22 is an adapter plate for the folding arm. It is 22 mm thick. Function: Spacer plate 22 mm for mounting the lower spherical plain bearing

The Z-K-KL2-DP25 is an adapter plate for the folding arm. It is 25 mm thick. Function: 25 mm spacer plate for mounting the lower spherical plain bearing

The Z-KL-KL²-DP5 is an adapter plate for the folding arm. It is 5 mm thick. Function: 5 mm spacer plate for mounting the lower spherical plain bearing

The ZVK-LOCK-A is an additional electric locking device that actuates the window's own locking hinge and automatically activates the subsequent opener drive. The locking mechanism is installed on the outside. The locking system can be used in SHEV and ventilation areas. Integrated sequence control for controlling 24 VDC drives The sequence controller for the connected 24 V DC drive technology with a total current of up to 6 amps is integrated in the ZVK-LOCK locking drive. The sequence controller enables the control of electromechanical drives with potential-free feedback contact in a fixed sequence. This is necessary, for example, if the drives are to open in a certain sequence and close again in the reverse sequence.

The ZVK-LOCK-I is an additional electric locking device that actuates the window's own locking hinge and automatically activates the subsequent opener drive. The locking mechanism is installed on the inside. The locking system can be used in SHEV and ventilation areas. Integrated sequence control for controlling 24 VDC drives The sequence controller for the connected 24 V DC drive technology with a total current of up to 6 amps is integrated in the ZVK-LOCK locking drive. The sequence controller enables the control of electromechanical drives with potential-free feedback contact in a fixed sequence. This is necessary, for example, if the drives are to open in a certain sequence and close again in the reverse sequence.

The PA-ZV-UNI is an additional electric locking device for securing large and wide sashes with an additional locking point. In the standard version, it can be combined with all electric drives that provide an F-contact or a potential-free contact in the closed position. On electromechanical drives, the sequence control can switch 6 A and control two folding arms, for example. Versatile installation options for the connecting cable The PA-ZV-UNI has the SICO-PLUG connector for surface-mounted wiring. The drive can be mounted very flexibly in all directions on the window using the combination covers on the fitting profile. This gives the service technician and planner a great deal of freedom in preparation and realisation. Self-adhesive points are supplied for mounting the additional locking mechanism so that the enclosed mounting plate of the PA-ZV-UNI can be pre-positioned on the window without any tools. The mounting plate allows installation for both inward-opening and outward-opening windows. The enlarged locking part also makes installation easier. Despite this, the PA-ZV-UNI has smaller dimensions and is less conspicuous on the window. As there is at least five millimetres of space between the locking mechanism and the locking part, positioning on the sash is unproblematic. Furthermore, readjustment is no longer necessary. Advantages of the new PA-ZV-UNI Same small space requirement on the window profile and frame. For inward and outward opening sashes Pre-positioning without tools and free choice of substrate by using the fixing plate: aluminium, PVC or timber Individually selectable surface-mounted installation position of the locking mechanism Simplified installation thanks to visually appealing combination covers. These combine installation on the fixing plate with the SICO PLUG electrical connection. Fast locking and unlocking Sash projection over +/- 30 mm sash possible unproblematic settling on the window sash, as there is sufficient clearance for the fixing block Advantages of the SICO PLUG Connection of the supply line only necessary after complete mechanical installation Specially developed plug system for universal use with SIMON PROtec PA products Smallest dimensions for up to six cores Variable termination insert with strain relief for one six-core, one three-core or two-core cables Flush termination with snap-in function