Ultra-flat projector ceiling lift for very flat and small installation conditions

FLATLIFT Ultra projector lift with 20 cm stroke for very flat suspended ceilings

Conceal the beamer or projector invisibly in the ceiling using the ceiling lift

With the Flatlift beamer ceiling lift ultra flat system, you can conceal projectors and beamers invisibly in a very flat ceiling, for example in a conference room or home cinema. At the touch of a button, the projector lift extends the projector downwards and you can start your presentation or movie night.

Quick and easy installation

Surface mounting With a little manual skill, you can install the projector lift in the ceiling and connect it. The Flatlift projector lift can also be screwed directly onto the ceiling and covered with wood or drywall.

Flush-mounted installation Install the Beamerlift invisibly in the ceiling. You can also install the projector lift in the ceiling (false ceiling). The projector lift then waits there in a ceiling niche, covered with a ceiling panel so that it cannot be seen when closed. At the push of a button, the projector lift can then be pulled out of the closed ceiling to be used.

Technical data:

• Installation dimensions: 655 mm x 642 mm x 160 mm
• Stroke 20 cm (adjustable)
• Lifting speed: 35 mm/sec
• Beamer weight max. 15 kg / 150 N
• Duty cycle 5 %
• Low noise level
• Optional connection to room control possible (blind switch / relay)

The Flatlift value guarantee for carefree operation:

• 200.000 lifting cycles tested
• 5-year full warranty VOB Proj.
• 6-fold soundproofed
• 20-year repair cost limit

Scope of delivery:

• Flatlift Beamerlift Thinline 100
• Radio remote control
• Radio receiver (pre-installed)
• Setting pin
• Mains cable (pre-installed)

Operating instructions download (DE and EN):

DE: https://lineardirect.eu/media/ba/7e/02/1763797366/FL-10060-Bedienungsanleitung.pdf

EN: https://lineardirect.eu/media/26/c7/69/1763797469/FL-10060-Manual.pdf

CAD Drawings Download (3D-STP.PDF.DXF.DWG.iAM):

Tender texts for architects and planners:

Tender specifications for architects and planners - Flatlift projector ceiling lift system FL-10060

Motorized ultra-flat projector ceiling lift system for flush integration of a projector in suspended ceilings suspended ceilings, technical ceilings or architectural cladding. The FL-10060 system enables a projector weighing up to 15 kg to be raised and lowered safely and offers an elegant, almost invisible solution for high-quality presentation, living and conference rooms and conference rooms.

The projector is motorized and extended downwards by up to 200 mm. The lifting movement is precise, low-vibration and quiet at a speed of 35 mm/sec. The end positions can be adjusted to the millimeter depending on the project.

Technical performance data

• Max. Projector weight: 15 kg
• Drive force: 150 N
• Lifting distance: 200 mm
• Lifting speed: 35 mm/sec.
• Stroke limit: electronically adjustable
• Noise level: < 45 dB
• Trigger/control signal: can be integrated (e.g. 12V trigger, potential-free)

Maximum projector size

• Height: up to 80 mm
• Width: up to 340 mm
• Depth: up to 400 mm

Installation dimensions of the system

• System width: 575 mm (with mounting bracket 735 mm)
• System depth: 555 mm
• System height: 120 mm

Control & integration

• Integrable trigger circuit (e.g. 12V, potential-free contacts)
• Compatible with building control systems: KNX, Crestron, AMX, Control4, RTI, Loxone, etc.
• Activation via media controls, push-buttons or automation systems

Quality & features

• Flush integration into suspended ceilings and architectural elements
• Quiet and low-vibration operation
• High-quality, low-maintenance mechanics
• Ideal for conference rooms, home cinemas, presentation rooms and living areas

Guarantee

• 5-year full service guarantee
• 30 years LRL* (Long-Running-Lifetime according to Flatlift specification)

Product according to manufacturer's specification:
Flatlift
Type: Projector ceiling lift system
Item no.: FL-10060