Additional electric locking device ZVK-LOCK-I
The ZVK-LOCK-I is an additional electric locking device that actuates the window's own locking hinge and automatically activates the subsequent opener drive. The locking mechanism is installed on the inside. The locking system can be used in SHEV and ventilation areas.
Integrated sequence control for controlling 24 VDC drives
The sequence controller for the connected 24 V DC drive technology with a total current of up to 6 amps is integrated in the ZVK-LOCK locking drive. The sequence controller enables the control of electromechanical drives with potential-free feedback contact in a fixed sequence. This is necessary, for example, if the drives are to open in a certain sequence and close again in the reverse sequence.
| Ambient temperature range: | -5 °C - +70 °C |
|---|---|
| Duty cycle: | 30 % |
| Housing: | Aluminium |
| Housing height: | 26 mm |
| Housing length: | 377 mm |
| Housing type: | Aluminium |
| Housing width: | 26 mm |
| Input voltage: | 24 V DC |
| Input voltage range: | - 15 % / + 15 % |
| Max. Switching current of the slave drive: | 6 A |
| Mounting type: | set up |
| Nominal locking force: | 300 N |
| Nominal operating temperature: | 20 °C |
| Output voltage: | 24 V DC |
| Overload protection: | electronic |
| Protection class: | IP32 |
| Protection class: | III |
| Rated current: | 1.1 A |
| Ripple: | 500 mV |
| Stroke length: | 18 / 36 mm |
| Switch off: | built-in electronic load cut-off |
Login
