Chain drives - powerful window openers
The PA-K-65 chain drive is an electromechanical drive unit for opening and closing windows and flaps. It is used for smoke and heat extraction and natural ventilation. The motor can be mounted on any window profile or frame using different fixing brackets. (The brackets are not included.) All PA-K-65 chain drives are equipped with a rigid chain.
PA-K-65 chain drives with SICO LINK software interface
The connection is made via the SICO-PLUG connector. This contains the SICO BUS programming interface, via which parameters such as opening stroke and force can be parameterised and other status messages can be read out. Products in the PA series are available in various versions, both as solo and synchronised actuators. They can be networked with each other in synchronous groups and for remote control with SHEV control centres and the building management system. All chain drives in the PA series are also available in the DA version, which enables connection on both sides.
PA-K-65 chain drives can be used with additional interlocks
The drive signals a potential-free contact for additional interlocks in the end positions and can therefore be used with interlocking drives in sequence controls. Thanks to the modern, EV1 anodised aluminium profile housing and the compact design, chain drives are very well suited for use in demanding properties in the residential and commercial sectors. Chain drives are available as solo drives and as synchronised drives.
Powerhouse with 650 N - performance features of the PA-K-65/1000-S chain drive
The PA-K-65/1000-S chain drive is a synchronised drive with integrated load cut-off. The chain drive can be used to automate inward and outward-opening windows and flaps on the façade. Installation is possible on main closing edges. With a pulling and pushing force of 650 N, the PA-K-65/1000-S chain drive opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke is 1000 mm. If required, the stroke can easily be shortened using the SICO LINK software interface.
Ambient temperature range: | -5 °C - 75 °C |
---|---|
Color: | On request |
Compressive force: | 650 N |
Duty cycle: | 30 % |
Housing: | Aluminium profile housing EV1 anodised |
Housing height: | 41 mm |
Housing length: | 827 mm |
Housing type: | Aluminium |
Housing width: | 50 mm |
Input voltage: | 24 V DC |
Input voltage range: | - 15 % / + 15 % |
Mounting type: | set up |
Nominal locking force: | 700 N |
Nominal operating temperature: | 20 °C |
Protection class: | IP32 |
Protection class: | III |
Rated current: | 1.9 A |
Running speed: | 11 mm/s |
Stroke length: | 1000 mm |
Switch off: | Integrated, electronic load cut-off |
Tractive force: | 650 N |
Login