Flatlift Pop-Down 665 - The vertical TV ceiling lift for TVs up to 43 inches

Lid Fixing Brackets - Lid fixing brackets for travelling cover plates The Flatlift Lid Fixing Bra ckets are specially developed lid fixing brackets with which the cover plate (lid) of a TV lift system is securely connected to the lifting mechanism. As a result, the lid moves and rotates automatically when the system is extended and retracted - without tilting, without readjustment and with perfectly synchronised movement. The clamps ensure a stable, play-free connection between the lift and lid and are ideal for wooden, MDF, metal or customised architectural surfaces. They enable clean, flush integration and ensure that the lid remains precisely aligned, regardless of the lifting or turning movement. The Lid Fixing Brackets are compatible with all Flatlift systems that support travelling lids and can be adapted to different project-specific requirements Download operating instructions (DE and EN): DE: https://lineardirect.eu/media/42/bf/b5/1763810927/FL-40020-Bedienungsanleitung.pdf EN: https://lineardirect.eu/media/3c/8d/33/1763810985/FL-40020-Manual.pdfDownload CAD drawings (3D-STP.PDF.DXF.DWG.iAM):CAD FL-40020.zip

Lid-O-Matic 2010 Light - Electric lid opener for pop-up and FLX-D swivel systems The Flatlift Lid-O-Matic 2010 Light is a compact, powerful electric lid opener that has been specially developed for Flatlift Pop-Up TV lift systems and FLX-D swivel systems. It enables the top cover plate to be opened automatically so that the TV lift or swivel system can remain completely concealed until it is actively used. When activated, the Lid-O-Matic opens the cover in a controlled and safe manner so that the lift or swivel arm can extend unhindered. After retracting, the electric lid opener closes the lid again cleanly, reliably and gently. This creates an elegant, completely closed surface - ideal for high-quality furniture, media walls or architecturally sophisticated integration solutions. The Lid-O-Matic 2010 Light is suitable for wood, MDF and many other lightweight lid materials and can be seamlessly integrated into existing flatlift systems. The system ensures permanently precise movement and offers a visually perfect solution for installations where the technology needs to be completely concealed. The lid opener is the ideal addition for all projects in which a pop-up lift or FLX-D swivel system is to be equipped with an automatic, travelling cover - perfect for living rooms, conference areas, hotel solutions or high-quality furniture installations. Instruction manuals download (DE and EN): EN: https://lineardirect.eu/media/db/73/ba/1763811072/FL-40010-LI-Bedienungsanleitung.pdf EN: https://lineardirect.eu/media/96/66/3e/1763811143/FL-40010-LI-Manual.pdfCAD Drawings Download (3D-STP.PDF.DXF.DWG.iAM):CAD FL40010-Li.zip Invitation to tender text for architects and planners - Flatlift lid flap partial infeed system (FL-40010-LI) The Flatlift FL-40010-LI is a motorised lid flap parts feed system, specially designed for TV lift furniture installations. It enables the automatic opening and precise closing of furniture flaps that conceal the TV lift. The flap is moved gently, quietly and safely by 90° by a motor and then retracted into the end position in a controlled manner. Ideal for high-quality furniture integration where the greatest possible elegance and low noise are required. The system is suitable for flaps weighing up to 15 kg and allows end positions to be set with millimetre precision. This allows the flap to be perfectly adapted to the furniture, the fittings and the individual design. Technical performance data Max. Lid plate weight: up to 35 kg (new) Stroke limit: electronically adjustable Folding movement: 90° motorised Noise: < 30 dB (very quiet) Installation dimensions of the system Height: 775 mm Width: 95 mm Depth: 190 mm Flap width: variable - depending on the furniture project Control & Integration Connection to room and building and building automation systems possible (potential-free contacts) Compatible with KNX, Loxone, AMX, Crestron, Control4, Savant, RTI and others. a. Ideally combinable with all motorised Flatlift TV lift systems Special features Smooth flap opening and precise part retraction Very quiet operation thanks to high-quality motorisation (< 30 dB) Ideal for designer furniture, high-quality home furniture, Hotel and contract installations Adjustable end positions for perfect adaptation to furniture tolerances Low-maintenance mechanics - durable construction Guarantee 3-year manufacturer's warranty Product as specified by the manufacturer: Flatlift Type: Lid flap partial retraction system for TV lift units Type.-No.: FL-40010-LI Instructions for installation and guide rails The professional installation of the system is the responsibility of the executing installation partner or integrator. Integrator. This includes, in particular, checking the installation situation and the mechanical guide elements. The C-profile rails must be completely clean before commissioning, dust-free and free of construction site residues (e.g. B. Wood dust, plaster residues, metal shavings or packaging residues). Deposits or foreign bodies in the guide rails can impair the running of the system and lead to increased mechanical resistance. This can overload the drive and mechanics. In the worst-case scenario , this can lead to malfunctions, blockages or damage to the drives. ⚠ Important note on planning & installation situation Checking the installation dimensions, TV compatibility and structural requirements is the responsibility of the customer or the{{ . of the executing planner or integrator. Before ordering and installation, please ensure that the selected TV model can be operated within the specified dimension, weight and movement parameters of the system. Design changes to the product - especially to flaps, housings or mechanical components - are not permitted without written approval from Flatlift. Unauthorised modifications can lead to the loss of guarantee and warranty claims. Flatlift provides all required CAD and installation data for download. By placing an order, acceptance of the technical documentation is deemed to have taken place. No liability can be accepted for planning errors, installation conflicts or lack of fit. On request, we offer a feasibility and compatibility check in advance for a fee.

Lid-O-Matic 2010 parts feeder - Electric lid opener with lid feeder for Platinum Swivel & FLX 90° systems The Flatlift Lid-O-Matic 2010 parts retractor is a specialised electric lid opener for the large Platinum Swivel TV lift systems and the FLX 90° swivel systems. This professional accessory ensures that the lid of your furniture is not only opened when the TV system is extended, but is also automatically retracted into the furniture. As a result, it remains completely concealed during operation and offers maximum freedom of movement for large swivelling and lifting systems. When starting the lifting or swivelling process, the Lid-O-Matic first lifts the cover plate in a controlled manner. As soon as the 90° lid opening is reached, the mechanism retracts the lid partially or - depending on the precision of the furniture construction - completely into the furniture. This means that the lid surface remains invisible and does not interfere with the mechanics of the system. In contrast to the classic Lid-O-Matic, this model does not close the lid after retraction, as the drawer is specially designed for swivelling and special movements. This technology is ideal for furniture, media walls or special constructions where the lid must neither protrude upwards nor collide with the swivel path. The partial retraction enables a flush, visually clean solution - even with large TV sizes and tight spatial tolerances. The Lid-O-Matic 2010 partial retraction is therefore the perfect addition for all high-end installations where the lid mechanism must be precisely matched to the lifting and swivelling movements. The mechanism is suitable for wood, MDF and other cover materials and is customised to the respective furniture situation on a project-specific basis to ensure precise, repeatable cover retraction. Operating instructions download (DE and EN): EN: https://lineardirect.eu/media/4d/ab/2f/1763811244/FL-40010-Bedienungsanleitung.pdf EN: https://lineardirect.eu/media/5e/39/b8/1763811317/FL-40010-Manual.pdf Invitation to tender text for architects and planners - Flatlift lid flap partial retraction system (FL-40010) The Flatlift FL-40010 is a motorised lid flap part feed system, specially developed for TV lift furniture installations. It enables the automatic opening and precise closing of furniture flaps that conceal the TV lift. The flap is moved gently, quietly and safely by 90° by a motor and then retracted into the end position in a controlled manner. Ideal for high-quality furniture integration where the greatest possible elegance and low noise are required. The system is suitable for flaps weighing up to 35 kg and allows end positions to be set with millimetre precision. This allows the flap to be perfectly adapted to the furniture, the fittings and the individual design. Technical performance data Max. Lid plate weight: up to 35 kg (new) Stroke limit: electronically adjustable Folding movement: 90° motorised Noise: < 30 dB (very quiet) Installation dimensions of the system Height: 775 mm Width: 95 mm Depth: 190 mm Flap width: variable - depending on the furniture project Control & Integration Connection to room and building and building automation systems possible (potential-free contacts) Compatible with KNX, Loxone, AMX, Crestron, Control4, Savant, RTI and others. a. Ideally combinable with all motorised Flatlift TV lift systems Special features Smooth flap opening and precise part retraction Very quiet operation thanks to high-quality motorisation (< 30 dB) Ideal for designer furniture, high-quality home furniture, Hotel and contract installations Adjustable end positions for perfect adaptation to furniture tolerances Low-maintenance mechanics - durable construction Guarantee 3-year manufacturer's warranty Product as specified by the manufacturer: Flatlift Type: Lid flap partial retraction system for TV lift units Type.-No.: FL-40010 Instructions for installation and guide rails The professional installation of the system is the responsibility of the executing installation partner or integrator. Integrator. This includes, in particular, checking the installation situation and the mechanical guide elements. The C-profile rails must be completely clean before commissioning, dust-free and free of construction site residues (e.g. B. Wood dust, plaster residues, metal shavings or packaging residues). Deposits or foreign bodies in the guide rails can impair the running of the system and lead to increased mechanical resistance. This can overload the drive and mechanics. In the worst-case scenario , this can lead to malfunctions, blockages or damage to the drives. ⚠ Important note on planning & installation situation Checking the installation dimensions, TV compatibility and structural requirements is the responsibility of the customer or the{{ . of the executing planner or integrator. Before ordering and installation, please ensure that the selected TV model can be operated within the specified dimension, weight and movement parameters of the system. Design changes to the product - especially to flaps, housings or mechanical components - are not permitted without written approval from Flatlift. Unauthorised modifications can lead to the loss of guarantee and warranty claims. Flatlift provides all required CAD and installation data for download. By placing an order, acceptance of the technical documentation is deemed to have taken place. No liability can be accepted for planning errors, installation conflicts or lack of fit. On request, we offer a feasibility and compatibility check in advance for a fee.

Lid-O-Matic 2010 full retraction - Electric lid opener with full lid retraction for Platinum Swivel systems The Flatlift Lid-O-Matic 2010 full retraction is an advanced electric lid opener, specially developed for the sophisticated Flatlift Platinum Swivel TV lift systems. In contrast to conventional lid openers, this system not only opens the cover plate, but also retracts the lid completely into the furniture so that it remains completely invisible during the entire lifting and turning movement of the TV. When starting the lifting process, the Lid-O-Matic 2010 full retraction first lifts the cover plate in a controlled manner. As soon as the opening position is reached, the lid is fully retracted into the furniture or lid construction. This creates absolute freedom of movement for the Platinum Swivel System - especially for large TV formats, 180° rotations and tight tolerances in furniture construction. The full retraction is ideal for furniture constructions in which the lid must not remain visible or cannot open upwards due to the design. Thanks to the precise mechanism, the retraction remains stable, repeatable and gentle on the material. The lid only returns to its starting position when the TV system is fully retracted (can be defined by the furniture manufacturer depending on the design). The Lid-O-Matic 2010 full retraction is therefore the premium solution for high-class TV integration projects and enables: a complete visual camouflage of the furniture cover -interference-free 90°-180° rotation of large Platinum Swivel systems an elegant, flush integration of large TV lifts maximum design freedom for architects and furniture makers The system is suitable for wood, MDF or customised cover constructions and is adapted to the respective installation situation on a project-specific basis. Operating instructions download (DE and EN): EN: https://lineardirect.eu/media/84/13/9b/1763811409/FL-40010-VE-Bedienungsanleitung.pdf EN: https://lineardirect.eu/media/62/1e/d5/1763811480/FL-40010-VE-Manual.pdfCAD Drawings Download (3D-STP.PDF.DXF.DWG.iAM):CAD FL-40010-VE.zip Invitation to tender text for architects and planners - Flatlift lid flap full-feed system (FL-40010-VE) The Flatlift FL-40010-VE is a motorised cover flap full-feed system, specially {{ developed }}for demanding TV lift furniture installations. It enables the automatic opening of a furniture flap by 90° as well as its controlled full retraction by 150 mm into the furniture - ideal for flush or recessed flap constructions, where maximum precision, smooth running and durability are required. Thanks to robust mechanics, precise end position guidance and extremely quiet motor operation, the system is ideal for high-quality furniture, premium interior solutions, living spaces, yachts, hotels and contract installations. With a load capacity of up to 50 kg flap weight , the FL-40010-VE can also handle heavy fronts and large cover panels. Technical performance data Max. Flap weight: 50 kg Folding angle: 90° motorised Full retraction: 150 mm into the furniture Speed: 7 mm/sec. Switch-on time: ED 5% Movement: Soft Start & Soft Stop Noise:very low operating noise level Installation dimensions of the system Width: 77.5 mm Depth: 242 mm Height: 709 mmMounting: next to TV in the furniture side panels or internal furniture side panels Control & Integration Compatibility: KNX, Loxone, Crestron, AMX, Control4, RTI, Savant and others. a. Connection via potential-free contacts possible Perfect addition to all Flatlift TV lift systems