Folding arm² side-hung sash PA-KL²-DF-50/140deg
€581.98 *
US$614.69
Product information "Folding arm² side-hung sash PA-KL²-DF-50/140deg"
The PA-KL²-DF bottom-hung arm² side-hung sash drive is an extremely powerful drive for the motorised opening and closing of bottom-hung, top-hung and side-hung sashes. It is suitable for use on inward and outward closing elements. The drive is mounted on the secondary closing edges and power is transmitted via a track of various lengths.
The PA-KL²-DF operator can be used very flexibly with regard to the installation situation and direction of rotation. Depending on the type of installation, opening widths of up to 140° are possible, enabling rapid smoke extraction and ventilation in the event of a fire. The PA-KL²-DF side-hung sash drive is tested and certified in accordance with DIN EN 12101-2 for use in a natural smoke and heat exhaust ventilator and can also be used for controlled natural ventilation (KNL).
The PA-KL²-DF side-hung sash drive has special kinematics and the high-performance gearbox (> 20,000 load cycles) in conjunction with the stainless steel lever arm is very robust. With a push and pull force of 500 N and small installation dimensions, this automatic opener is ideal for projects with high demands on functionality and design.
It is connected via the SICO-PLUG connector. This includes the SICO BUS programming interface, via which parameters such as opening stroke and force can also be parameterised directly on site and other status messages can be read out. The PA-KL²-DF side-hung sash drive can be networked with SHEV control centres and the building management system for remote control.
The drive also offers a potential-free contact in both OPEN/CLOSE end positions. Sequence control and start-up delay are freely adjustable. The freely adjustable start-up delay makes the side-hung swing door arm ideal for the automated opening of French casements. The PA-KL²-DF side-hung sash drive can also be used in combination with an additional locking device.
Your benefits at a glance:
- suitable for bottom-hung, top-hung and side-hung leaves
- versatile use on secondary closing edges
- Automation of inward and outward opening elements possible
- Opening angle 140°
- large ventilation cross-section
- low operating costs
- programmable via software interface
- 3-year guarantee
| Ambient temperature range: | 0 °C - 75 °C |
|---|---|
| Classification: | DIN EN 12101-2, DIN EN 60335-1, DIN EN 60335-2-103 |
| Color: | RAL & DB colours |
| Compressive force: | 500 N |
| Duty cycle: | 30 % |
| Housing: | Aluminium profile housing E6 / EV1 anodised |
| Housing height: | 118 mm |
| Housing length: | 568 mm |
| Housing type: | Aluminium |
| Housing width: | 58 mm |
| Input voltage: | 24 V DC |
| Input voltage range: | - 15 % / + 15 % |
| Mounting type: | set up |
| Nominal locking force: | 700 N |
| Nominal operating temperature: | 20 °C |
| Opening angle: | 140 ° |
| Protection class: | III |
| Protection class: | IP54 |
| Rated current: | 1.5 A |
| Ripple: | 500 mV |
| Running speed: | 2.8 °/s |
| Switch off: | Integrated load cut-off with microprocessor |
| Tractive force: | 500 N |
Login
Zubehör
The K-KL²-DF-800 bracket is an accessory for folding arm² side-hung sash operators. Function: Bracket set with sliding part and 800 mm track for PA-KL²-DF(-K) K-KL²-DF-800 bracket at a glance: Accessories for folding arm for mounting on the side-hung sash with stainless steel cover, 800 mm
The K-KL²-DF-600 bracket is an accessory for folding arm² side-hung sash operators. Function: Bracket set with sliding part and track 600 mm for PA-KL²-DF(-K) K-KL²-DF-600 bracket at a glance: Accessories for the folding arm for mounting on the side-hung sash with stainless steel cover, 600 mm
The K-KL²-DF-400 bracket is an accessory for folding arm² side-hung sash operators. Function: Bracket set with sliding part and 400 mm track for PA-KL²-DF(-K) K-KL²-DF-400 bracket at a glance: Accessories for the folding arm² side-hung sash for mounting on the side-hung sash with stainless steel cover, 400 mm