Linak DESKLINE® lifting column DL5 stroke 500 mm up to 800 N in 38mm/s
€119.06 *
US$125.75
delivery time: 5-10 days
Product information "Linak DESKLINE® lifting column DL5 stroke 500 mm up to 800 N in 38mm/s"
The DESKLIFT DL5 is a compact two-part lifting column. It is the perfect choice for many desks, especially in the office area. The DL5 has a compact motor housing that is almost invisible in the frame construction. The column is very stable, so no crossbar is needed. The DL5 has the same dimensions and mounting holes as the three-part DL6 column. This means that the are both compatible and can be used in the same frame and base construction.
| Compatible with DESKLINE control units and all DESKLINE operating elements: | Yes |
|---|---|
| Duty cycle: | 10 % |
| Force (pressure): | 800 N |
| Force (pull): | 0 N |
| Hall sensor (enables parallel operation with control units): | Yes |
| Installation dimension: | 645 mm |
| Mains voltage: | 120 V / 230 V |
| Single or 2, 3, 4 use in parallel possible: | Yes |
| Speed: | 38 mm/s |
| Stroke: | 500 mm |
Login
Zubehör
The tool for the correct use of Linak lifting columns: With the Linak USB2LIN06 processor programming cable, you can set up Linak CBD6S controllers as you wish using the Linak software (Windows-based). Among other things, you can set a lower or upper end point, as well as speed and anti-collision. Read out and cancel error codes You can also read out error codes and delete any error codes that may have been recorded. If you are using Linak drives, we recommend that you use this programming cable.
Linak EU CBD6S Mains plug 230V 1.5m black for CBD6S controller
LINAK BA001 is a high power accumulator solution with 2.15 Ah for electric linear actuator systems. Ideal for trolleys, recliners and TV/monitor racks. It has an LED status indicator and an audible alarm. LINAK has developed the BA001 battery box that can be used for the various DESKLINE® and HOMELINE® systems. A battery box is very useful in mobile applications, such as mobile trolleys, or applications where a mains cable would be in the way, such as recliners. The BA001 is a high-performance lithium-ion battery with a capacity of 2.15 Ah. The battery box has an LED light indicator that shows the charge level and an audible alarm that indicates that the battery needs to be charged. The BA001 is a very compact unit that comes standard with a mounting bracket that allows easy replacement of the battery. Disclaimer: If, during the warranty period, Li-ion batteries installed in LINAK / Lineardirect.eu products are found to be defective, LINAK / Lineardirect.eu will provide the OEM with a new product. LINAK / Lineardirect.eu expressly excludes all other remedies. LINAK / Lineardirect.eu shall under no circumstances be liable for any indirect incidental or consequential damages resulting from events related to the inherent risk of thermal instability in the Li-ion cell and the use of LINAK / Lineardirect.eu products. Furthermore, LINAK / Lineardirect.eu expressly excludes any liability for lost profits, anticipated but not realised savings, third party claims against our customer and other economic losses, even if LINAK / Lineardirect.eu has been advised of the possibility of such damages.
Lightweight and slim control box designed for LINAK actuator systems. Plug & play compatible with all Linak linear actuators for tables and workstations and other projects in which a lifting column can be used. Low standby power (<0.1W), PVC-free, and low-noise performance. The control unit is compatible with all Linak DESKLINE® lifting columns DL4S/DL11XL etc. With the Linak programming cable, you can use software and a computer / laptop to programme lower and upper end positions and also adjust the running speed. The LINAK CBD6S control box replaces the LINAK CBD4 control box that was available until 2015. You can also connect older LINAK tables where the LINAK CBD4 control box is defective. The LINAK CBD6S is compatible with LINAK actuators that were previously controlled with the CBD4.
The control element is compatible with all DESKLINE® control units. User-friendly Desk Panel for adjusting lifting columns. Ideal for adjustable desks and workstations. Easy-to-mount Desk Panel with soft rubber arrow keys and connection cable. Connects to CBD6S for remote control of Linak lifting columns.
Linak DESKLINE® motor cable 1 m black. The connecting cable for Linak DL 4/6/11/11XL lift columns and LA 23/31/28 linear actuators to the CBD6S control unit. Suitable for all DESKLINE® actuators. Easy installation due to prefabricated and twist-proof plugs.
Linak DESKLINE® motor cable 2 m black. The connecting cable for Linak DL 4/6/11/11XL lift columns and LA 23/31/28 linear actuators to the CBD6S control unit. Suitable for all DESKLINE® actuators. Easy installation due to prefabricated and twist-proof plugs.
Lightweight and slim control box designed for LINAK actuator systems. Plug & play compatible with all Linak linear actuators for tables and workstations and other projects in which a lifting column can be used. Low standby power (<0.1W), PVC-free, and low-noise performance. The control unit is compatible with all Linak DESKLINE® lifting columns DL4S/DL11XL etc. With the Linak programming cable you can use software and a computer / laptop to programme lower and upper end positions and also adjust the running speed. The LINAK CBD6S control box replaces the LINAK CBD4 control box that was available until 2015. You can also connect older LINAK tables where the LINAK CBD4 control box is defective. The LINAK CBD6S is compatible with LINAK actuators that were previously controlled with the CBD4.
By using Linak multiparallel cables, you can run up to 4 CBD6S controls in multiparallel mode when using 3 multiparallel cables and thus control a maximum of 16 DL actuators at once. With multi-parallel operation, the Linak DESKLINE lifting columns all move synchronously. A multi-parallel cable connects 2 CBD6S controls. One CBD6 controller is master and the other CBD6S controller is slave.