Linear actuator PA-L-100/120-S
The PA-L-100/120-S is a linear actuator in a special aluminium tube with an integrated multifunctional groove. This installation enables flexible mounting and almost invisible routing of the connecting cable.
The push tube is extended and retracted via the internal spindle. During this process, the actuator has a force of 1000 N in the pushing direction. The integrated electronic load cut-off monitors the actuator's current consumption and switches it off in the event of an overload.
Synchro drive with integrated synchronisation control
The PA-L-100/120-S is a synchronised actuator with integrated synchronisation control. This synchronisation control enforces synchronous operation of two, three or four electromechanical linear actuators, which are speed-controlled. If one of the interconnected drives is overloaded, a connecting wire switches off the drive group (combination of up to four drives).
Please order brackets separately.
Your benefits at a glance:
- Maximum force despite small diameter
- Invisible installation of the connecting cable
- Flexible fastening technology
- Integrated load cut-off
- Force of 1000 N
- Flexible bracket sets
| Ambient temperature range: | -5 °C - 75 °C |
|---|---|
| Color: | On request |
| Compressive force: | 1000 N |
| Diameter: | 36 mm |
| Duty cycle: | 30 % |
| Housing: | Continuous aluminium profile tube, anodised E6/EV1 with integrated holder for flexible bracket system |
| Housing height: | 42 mm |
| Housing length: | 507 mm |
| Housing type: | Aluminium |
| Input voltage: | 24 V DC |
| Input voltage range: | - 15 % / + 15 % |
| Mounting type: | set up |
| Nominal locking force: | 1000 N |
| Nominal operating temperature: | 20 °C |
| Protection class: | III |
| Protection class: | IP54 |
| Rated current: | 1.0 A |
| Running speed: | 4.4 mm/s |
| Stroke length: | 120 mm |
| Switch off: | integrated electronic load cut-off |
| Tractive force: | 1000 N |
Login
Accessories
